Pellet Stove Dealers Near Me
A pellet stove is a solid combustible tablets made from compressed sawdust and wood waste to provide heat to your home. Some models also burn biofuels such as corn kernels and nutshells.
Pellet stoves do not have chimneys and require electricity to run the auger that feeds the pellets into the fire. This is why some manufacturers offer backup battery systems to ensure your stove will continue operating in an outage of power.
Freestanding Pellet Stoves
Freestanding pellet stoves are a popular choice for homeowners looking to add supplemental heat. They are suitable for heating one room or several rooms and are simple to clean and use. These stoves use pellets that are made from compressed sawdust similar to what your pet rabbit would eat. pellet stoves cheap are stored in the hopper, and an electric auger feeds them into the combustion chamber to spark them. The wood pellets emit heat, which is then circulated through an air blower and spreads throughout the room. This kind of heat is less expensive than a gas furnace or ductless mini split and more attractive than traditional wood stoves.
Pellet stoves have a sleek design that is less obtrusive than traditional wood-burning models. They're also less maintenance-intensive than fireplaces and are often equipped with digital controls that make it easy to control the amount of heat being produced. Some models can be hooked up to a thermostat and programed to help homeowners save money on heating costs.
You should choose the stove that has been certified for clean combustion and efficiency by the U.S. Environmental Protection Agency as well as an independent organization like the Pellet Fuels institute (PFI). Look for the Underwriters Laboratories certification or Canadian ULC label that proves that the stove is safe.
Since these appliances rely on electricity to run their automatic features, you'll want a plan in place for what to do in the event of an outage. Some models, like the Piazzetta Marcella 2.0 has a backup battery system that keeps the fans and feeders operating when power goes out.
Pellet Stoves with Pellet Inserts
Pellet stoves are installed inside a fireplace to replace traditional wood-burning fires. They are highly efficient and provide plenty of heating power, just like freestanding pellet stoves. They also burn renewable fuels in place of fossil fuels or wood, and do not produce greenhouse gases. The savings in energy costs will add up over time. Plus, you can get a 30% tax credit (up to $2,000 per year) on the cost of your pellet insert.
The primary difference between wood and pellet fireplace inserts is that they burn compressed milled wood byproducts instead of seasoned wood. This lets them burn more hot and more quickly than traditional wood-burning fireplaces. This reduces emissions and boosts energy efficiency. They are also easier to use, using less ash. They have automatic ignition and self-starting functions which make it simple to start the fire. The fire is fed continuously from a hopper so you don't have to manually feed it as you would with a traditional wood-burning fireplace.
Pellet fireplace inserts have a few disadvantages. For one, they require adequate dry storage space for the pellet fuel. They're also dependent on electricity to power their automated features, so they might not be an option during a power outage. Certain models also emit sound when they are in operation, so may not be suitable for homes with acoustic.
Custom Pellet Stoves
Pellet stoves are a safe efficient and energy-efficient alternative to wood fireplaces and traditional wood stoves. They burn pellets made from compressed sawdust and other wood byproducts which is greener than burning real wood. They also cause less pollution than wood stoves. Because they are easy to use and low operating costs pellet stoves are gaining in popularity. Whether you're looking for an efficient pellet stove to heat your basement or a new stove for your home, there are plenty of choices available.
If you are considering purchasing a pellet stove then seek out a dealer who has expertise in these hearth products. A reliable dealer will give you expert advice, install your stove correctly, and service it if required. A factory-trained tech is a crucial component of the process. They will assist you in understanding how to operate and maintain your stove.
Choosing the best stove for your space depends on your heating needs and the dimensions of your home. Typically, you'll want to choose a model that provides the equivalent of 5,000 British thermal units (BTUs) of power for heating for each 200 square feet of living space. You should also think about the amount you're willing to spend on heating fuel and other sources within your home.
It is crucial to remember that pellet stoves were only intended to be a secondary heating source, not a primary one. They are not designed to replace furnaces and are not recommended for homes with insufficient insulation. They should only be installed in areas where there is enough access to an existing venting system. Pellet stoves also require electricity to operate their automated features such as the pellet feeder and fan. These appliances can be operated by hand or using batteries in the event that power is cut off.
Pellet Stove Repair
Pellet stoves require regular maintenance to run safely and efficiently. To avoid future costly repairs it is essential to recognize the indications that a stove is causing problems. For instance, if your flame dances lazily and has black tips, a lack of air is probably the culprit. This issue could be caused by dirty burners, a blocked auger or hopper, or an insufficient heating setting. It is best to consult with an expert in this instance.
A professional can typically assess a pellet stove's needs and carry out necessary maintenance for $100-$150 per hour. This includes cleaning the stove, fixing or replacing the exhaust fan, as well as lubricating the moving parts. Repair costs may vary based on the severity of the issue, and a qualified technician should provide an estimate prior to performing any work.
Smoke or soot coming out of the chimney, low heating, or noisy operating are all issues that need professional repair. These issues can also result from a defective damper or blower. A local fireplace technician can repair the blower at a cost of $275 to $440, or the damper for $380 - $550.
Another common problem is the auger motor breaking down. This can be a serious issue as it affects the stove’s ability to feed the fuel into the burner. The auger motor can cost between $80 and $150 and it can require a local fireplace technician as long as three hours to install the replacement. It is recommended to clean the hopper and firepot regularly. Doing this can reduce the amount of ash that builds up on the glass door and impedes the flame view. For instance a local technician for fireplaces can remove the burn-pot cover and use a specific brush to clean away the ash that has been accumulated.
Pellet Stove Installation
A pellet stove can be installed at a new residence or converted into a wood-burning fireplace insert. Installation costs vary depending on the location. They start at $1000 for a freestanding model, and range from $3,000 to $5,000 for wall-mounted units. Venting systems can range from $1,200 to $1,200 or $500 depending on whether you require vents in the horizontal direction or a ceiling vent or one that requires chimneys.
Pellet stoves come with a host of benefits that make them more convenient and cost-effective than other heating sources. They use less fuel than gas or wood-burning stoves, and they can be programmed to automatically shut off and on at predetermined times. They are more flexible than wood stoves because they let you choose between low and high temperature settings.
The size and type of pellet stove you need will depend on how much heat you require for your home. As a rule of thumb you will require about 5 000 British Thermal Units (BTUs) to provide 200 square feet of living space. This calculation can be affected by variables like insulation and climate.
Consider how much fuel you will need and where you intend to keep it when shopping for an all-new pellet stove. A dealer can help you determine how many BTUs your home needs by visiting the stove and taking measurements. A professional will suggest an electric stove that can produce enough heat for your home based on the size of living space you would like to warm.
A pellet stove makes use of electricity to power its motorized components, so it should be placed near a power outlet that supports 110 volts. It is recommended to install a backup generator that will keep the pellet stove operating in the event of a power outage.